Welcome. Get your technical questions answered and offer your help too!!!

Use EcoCash to buy NetOne & Telecel airtime online. Tap here
advertisement
advertisement
7k views
by new here (140 points)

Use EcoCash to buy NetOne & Telecel airtime online. Tap here
advertisement

2 Answers

0 votes
by Regular (4.4k points)
No: 1 Setting up of your decoder, make sure that your decoder software is updated to the latest version. To do this update: Press the Menu button. Select "Advanced Options" and press OK. Select "DSD UPGRADE" and press OK. The decoder should start to upgrade the software now.

No: 2 Press menu Select "Advanced Options" Select "Dish Installation" Enter the pin "9949" Select "Network Configuration" Select "Network 2 Setup" NB: Leave "Network 1 Setup (Home)" unchanged!! Set Signal Setup to "Enabled" by selecting it, and moving left or right Set Frequency to "11170" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "3/4" Select "Accept these settings"

No: 3 Select "Network 3 Setup" Set Signal Setup to "Enabled" Set Frequency to "11625" Set Symbol Rate to "15000 Set Polarization to "Vertical" Set FEC to "3/4" Select "Accept these settings"

No: 4 Select "Network 4 Setup" Set Signal Setup to "Enabled" Set Frequency to "11674" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "5/6" Select "Accept these settings"

No: 5 Select "Network 5 Setup" Set Signal Setup to "Enabled" Set Frequency to "12522" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"

No: 6 Select "Network 6 Setup" Set Signal Setup to "Enabled" Set Frequency to "12562" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"

No: 7 Select "Network 7 Setup" Set Signal Setup to "Enabled" Set Frequency to "12682" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"

No: 8 Select "Network 8 Setup" Set Signal Setup to "Enabled" Set Frequency to "12722" Set Symbol Rate to "26657 Set Polarization to "Vertical" Set FEC to "1/2" Select "Accept these settings"

No: 9 Exit once to go back to the "Dish Installation" menu Select "Scan All Networks" Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected! Once completed, your picture will return as normal

To access you public channels, press the "TV button" on your remote control. The "Bouquet Options" menu will appear. Select "Public PAS7/10" Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the "music note" on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.
0 votes
by
GNF TV SETTINGS ON DSTV HD

This one?

GNF TV on Dstv HD

Network 1

Enable network : yes
No further changes.

Move to Network 2

Enable Network : Yes
Use Unit               :  Yes
Frequency          : 12682
Modulation        : Dvb-s
Symbol rate       : 26657
Fec                      : 2/3
Polarization      : Horizontal

Scan this           : Ok

Network 3

Same as above

Frequecy        : 12522
Symbol rate   : 27500
Fec                  : 3/4
Polarisation   : Vertical

Scan This.

Network 4

Frequentcy : 12602
Modulation vbs-s
Symbol rate :26657
Fec : 2/3
Polarisatioon : 2/3

Scan this : ok

Please ensure that your decoder signal quality is 100% in oder to get most of the public channels including GNF
When scanning is done, press 1111 or review all channels and nevigate to GNF TV, channel number will differe as per your locations but b the common number i witnessed in most HD decoders i installeed is 1005. others 1062
Welcome to Techzim Answers,

You can ask questions and receive answers from the Zimbabwean internet community.

If you're not sure how to proceed from here just click here and ask
...